Discover 32
The ultimate IoT development platform for all your innovative needs.
Discover 32
Discover 32 is the perfect hardware platform for makers. It helps you create a lot of powerful and exciting IoT applications. The Discover 32 board offers to solutions makers, solutions designers, IoT Professionals, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others. A powerful and reliable hardware platform capable of turning your ideas into reality.
Specifications
Expressif ESP32 Processor
- Main processor: Tensilica Xtensa 32-bit LX6 microprocessor Dual Core
- Clock frequency: up to 240 MHz
- Performance: up to 600 DMIPS
- Ultra low power co-processor: allows you to do ADC conversions, computation, and level thresholds while in deep sleep.
Memory
Internal memory
- ROM: 448 KB For booting and core functions.
- SRAM: 520 KB For data and instruction.
- RTC fast SRAM: 8 KB For data storage and main CPU during RTC Boot from the deep-sleep mode.
- RTC slow SRAM: 8 KB For co-processor accessing during deep-sleep mode.
- eFuse: 1 Kbit Of which 256 bits are used for the system (MAC address and chip configuration) and the remaining 768 bits are reserved for customer applications, including Flash-Encryption and Chip-ID.
- Embedded flash: 4 MB ( * optional FRAM: 4 / 8m MB )
Wireless Connectivity
- Wi-Fi: 802.11 b/g/n/e/i (802.11n @ 2.4 GHz up to 150 Mbit/s)
- Bluetooth: v4.2 BR/EDR and Bluetooth Low Energy (BLE)
- LoRaTM: LoRaTM Modem Long Range Transceiver Radio Module 868 Mhz
General Purpose Input/output Peripherals
- Rich peripheral interface with DMA that includes capacitive touch
- ADCs (analog-to-digital converter)
- DACs (digital-to-analog converter)
- IAC (Inter-Integrated Circuit)
- UART (universal asynchronous receiver/transmitter)
- CAN 2.0 (Controller Area Network)
- SPI (Serial Peripheral Interface)
- IAS (Integrated Inter-IC Sound)
- RMII (Reduced Media-Independent Interface)
- PWM (pulse width modulation)
Security
- IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
- Secure boot
- Flash encryption
- 1024-bit OTP, up to 768-bit for customers
- Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)..
Cryptographic accelerator with Secure Hardware-based Key Storage
Power
- Can be powered from any combination of USB, Battery, or VIN Pin
- Nominal Operating Input voltage: 5V
- Battery voltage: 3.2V – 4.2V
- Over-voltage protection
- Low-noise, low power, switching power supply, with output up to 800mA
- Built in Li-Ion/LiPolymer charger with charging status indicator LED
- Low power consumption
Real-Time Clock (RTC) and calendar optimized for low power consumption
Sensors and Peripherals
- Low Power 3-axis accelerometer and 3-axis
- Indoor Air Quality Sensor ( senses a wide range of TVOCs, eCO2 and MOX )
- Absolute Barometric Sensor
- Temperature and Relative Humidity Sensor
- UV index and Ambient Light Sensor
- Addressable RGB color Led
- Battery voltage reading
- Boot and RESET button
- GPIO Status Led Blue ,
- OLED I2C Display ►Size: 0.91 inch ►128×32 Dot Matrix ►Built-in controller SSD1306
General Purpose Input/output Peripherals
- USB (via CP2101 UART Bridge),
- 25x General Purpose IO,
- 15x 12-bit ADC and 2x 8-bit DAC
- 9X touch sensor
- CPU on-chip temperature sensor
- 4x SPI master/slave (can be mapped to any pin)
- 2X I2C master/slave (can be mapped to any pin)
- 2X I2S (Inter-IC Sound Interface) master/slave modes,in full or half duplex, (can be mapped to any pin) , 3x UART
- SD memory card support
- RTC timer and watchdog
- Hall sensor on-chip
- 16 channels PWM (can be mapped to any GPIO)
- Ethernet Interface
Components
Get In touch
(408) 409-7449
available from 10:00 – 19:00
Address: 691 S Milpitas Blvd, Suite#203, Milpitas, CA, 95035
Email: hello@hfa.one